CultiKit Quick Start

CultiKit consists of a controller with accompanying LED panels that together create optimal conditions for your plants. The system is compatible with PWM fans as well as all types of DC pumps and fans. Installing is easy. Both the controller and LED panels feature keyholes, and with the included screws, they can be easily mounted on any type of furniture.

Installation

1Install the controller, lights, and accessories where desired.

2 Connect the supplied 3-pin cables to LED panels and LED ports.

3Connect 12V PWM fans to port 1 (use PWM converter for third-party fans).

4Connect 5-12V DC devices to port 2 (use DC converter cable).

5Plug in the controller with the power supply, and let magic begin!

For full control, download CultiApp and follow the instructions.

Operation

LED ports are preset for sprouts and herbs with 50% brightness. Lights automatically turns on for 12 hours when the controller is connected – then turns off for 12 hours and repeats the cycle.

Connect the controller at the time you want it to start every day or download CultiApp for maximum control.

LED lights:
12-hour on/off cycle with 30-minute up and down dimming. Preset to 50% light power.

Fan/pump 1:
24-hour cycle with 5-second on and 25-second off loop. Preset to 80% power.

Fan/pump 2:
24-hour cycle with 1-minute on and 5-minute off loop. Preset to 100% power.

The button has three predefined settings and a reset function:

1 click – Toggle status light on/off.
2 click – Change LED power to 100%.
3 click – Change LED to 18-hours ON 6-hours OFF.

Hold 6 sec – Reset controller (all functions including on/off timing).

CultiApp

Full Control with CultiApp

CultiApp makes it easy to take full control of your system. Simple installation and user-friendly instructions guide you through the setup, allowing you to quickly customize lighting, ventilation, and watering exactly as you want.

CultiApp for Android » CultiApp for iOS »

Once you have downloaded the app, you just power on the controller and open the app. It will help you access your wifi and set up all the settings, so that in the future you have full control over your system including access to updates and App Support.

Technical specification

Input plug type	Type C
Input voltage	115-240V AC
Output voltage	24V DC
Output current	>= 2.5A
Output plug	2.1 mm ID x 5.5 mm OD
Dimensions	Controller (MK_230818A V1.0): 88x65x22 mm – LED panel (MK_230808LED V1.0): 40x120x10 mm (WxDxH)
PSU	Brand: LED Driver – Model: 240250VH-EW – Input: 220-240V-50/60Hz 0.5A – Output: 24V-2.5A 60.0W – Dimensions: 73x54x102 mm (WxDxH)
Manufactured by:	Culti ApS – Kystvejen 4 – 4600 Koege – Denmark – www.cultiplantsystems.com © Culti ApS 2025 – All rights reserved – MK_230818A V1.0 – MK_230808LED V1.0 – Made in China
Conformity	This equipment has been tested and certified with SGS certification (CE, RoHS, EMC, RED). These standards provide reasonable protection against harmful interference in a residential installation. Hereby, Culti ApS declares that the equipment is in compliance with Directive 2014/53/EU. See the full text of the EU declaration of conformity at: https://cultiplantsystems.com/culti-dk/EU-Declaration-of-Conformity.pdf

Frequently Asked Questions

How much energy does the system use?
CultiKit is a low voltage system with low energy consumption. The energy consumption depends on how many LED panels, fans and pumps that are connected, how long they run and at what power they run. A controller with 3 LED panels, 2 fans and 1 pump connected at 100% power and runs 12 hours a day uses approx. 30-40W. For comparison, a 42” LED TV uses 70-90W.

If something does not operate as it should, what do I do?
Check as the first troubleshooting here in the guide or check our support and see if you can solve the problem. CultiKit comes with a 2 year warranty so any damage that may happen during shipping or normal wear and tear is covered under the warranty. We will send you replacement parts at no cost to you. Contact support for replacement.

Can I go on vacation and leave my plants?
Yes, as long as you have an irrigation system that supports it you can go on holiday without anyone having to look after your plants.

Are the CultiKit LED lights full spectrum?
Yes, the LED panels consist of efficient Samsung LM301B diodes with a carefully selected mix of 3000K and 5000K LED diodes that ensures a full-spectrum light.

How long does the LED panels last?
Our LED panels and Samsung diodes have a documented lifespan of 50,000 hours. That’s a lot of hours, for example is there 8,765 hours in a year.

Can I adjust the lighting schedule and the lights’ intensity?
Yes, you can easily adjust both on the controller button and with CultiApp. Choose the time of day your lights turn on and at what intensity to balance your plants.

Can I adjust sequence on fans and pumps?
Yes, you can easily adjust both with CultiApp. Choose the time of day your fan and pumps turn on, at what power and how they make the on/off loop (for wind simulation and pump sprayer settings). Check out support for tips and tricks.

Contact Us

FIll out the form below and we will cantact you as soon as possible